Project Description
Cryolipolysis Fat Freezing Machine – FreezeFats DoubleChin
Overview
Portable cryolipolysis fat freezing machine with four heads, especially for double chin
The FreezeFats DoubleChin cryolipolysis fat freezing machine comes with 1×100 head, 1×150 head, 1×200 head, 1xdouble chin head, used for local fat burning, body sculpting and double chin removal. Popular in home use, clinic, salon and spa due to portable design, reasonable price, powerful performance and stable quality.
-
8-inch LCD touch screen
-
Freezing temperature up to -11 ℃
-
4 fat freezing heads of different size
-
Handpiece automatically recognized technology
-
Heating-Cooling anti-frostbite control technology
-
Automatic fault detection technology
-
Intelligent vacuum stabilization technology
Annotations for cryolipolysis fat freezing machine
4 Cryolipolysis Fat Freezing Handpieces
-
LCD screen show real-time temperature and vacuum intensity
-
Heating before cooling procedure to avoid skin burning
-
Lowest fat freezing temperature up to -11 ℃ with semiconductor cooling and water cooling system
-
Powerful vacuum suction intensity up to 80kPa
-
Integrated red-green photon technology for blood circulation promotion and skin swelling reduction
Antifreezing Membranes
-
As consumables, anti-frostbite membranes with gel prevent skin from frostbite
-
Three different size of membranes used with four different size of fat freezing handpieces
-
Package comes with 10 free medium-size membranes for trial use. If you need more, order here: https://www.mtsaes.com/shop/antifreeze-membranes/
Screen Interface
-
8-inch LCD touchscreen with user-friendly and simple interface
-
Handpiece can be automatically recognized once connected with the cryolipolysis fat freezing machine
Fat freezing machine operation demo
Water adding and draining
-
This machine is water cooling system and water is required to add before using this machine. Distilled water is recommended. Do not use tap water (contains too much impurities) to avoid water pumps’ fault.
Water adding process:
Step 1: Insert a pipe with funnel into ‘inlet’, and insert another pipe into ‘overflow’. Keep adding water from ‘inlet’ until ‘overflow’ overflows water.
Step 2: Power on machine – password 888888 – setting – liquid setting – start countdown for 30 seconds. After countdown is over, add water again until water overflows again.
Step 1: Insert a pipe with funnel into ‘inlet’, and keep adding water from ‘inlet’ for 3 minutes while inserting a pipe into ‘outlet’ (means adding water and draining water at the same time for 3 mins, to remove the bubbles/air pressure from water circulation system).
Step 2: After that, remove pipe from ‘outlet’, and insert it into ‘overflow’. Proceed with the water adding process.
Water drainage process:
Insert a pipe into ‘overflow’, and insert another pipe into ‘outlet’.
Technical Specs
| Size200 Handpiece | Size150 Handpiece | Size100 Handpiece | DoubleChin Handpiece | |
|---|---|---|---|---|
| Heat Temperature | 37~45 ℃ | 37~45 ℃ | 37~45 ℃ | 37~45 ℃ |
| Cryo Temperature | -11~5 ℃ | -11~5 ℃ | -11~5 ℃ | -11~5 ℃ |
| Vacuum Intensity | 10~80 kPa | 10~80 kPa | 10~80 kPa | 10~80 kPa |
| Photon | Red(630nm) green(570nm) |
Red(630nm) green(570nm) |
Red(630nm) green(570nm) |
N/A |
| Treatment Area | 7*20 cm | 5*15 cm | 4*10 cm | 3*8 cm |
| Power | 450W | |||
| Touchscreen Size | 8-inch | |||
| Voltage | 220V/50Hz,110V/60Hz | |||
| Unit Weight | 15.5KG | |||
Packing List
| Host | 1 unit |
| Fat Freezing Handle | 1 set (4pcs) |
| Membranes | 10 pcs (medium) |
| Handpiece Holder | 1 pc |
| Silicone Tube | 1 pc |
| Fat Caliper | 1 pc |
| Band Ties | 1 pc |
| Power Supply Line | 1 pc |
| User Manual | 1 pc |
| Sealing Ring | 10pcs |
| Hexagonal Screw Driver | 1 pc |
| Hexagonal Screw | 2 pcs |
How Does Cryolipolysis Work?
Customer Questions & Answers
No, only one handpiece can work at the same time.
Almost same on performance. But when using FreezeFats DoubleChin cryolipolysis machine, only 1 handpiece can work at the same time. Built-in 1 channel, 1 water tank containing 1 water pump.
100% superior quality and can achieve perfect results. FreezeFats DoubleChin cryolipolysis machine is popular now and got 99% positive feedback from our clients.
Distilled water is recommended as machine’s coolant. Do not use tap water (contains too much impurities) to avoid water pumps’ fault.
-
Heating temperature: 40 °C (3 mins).
-
Cooling temperature: Depends on patient’s fat thickness and skin sensitivity. If a lot of fat, use lower temperature. If a little fat, use higher one. If skin is more sensitive, use higher temperature. If not, use a lower one. -2 °C is recommended for the first treatment. And adjust the cooling temperature to a lower one for the following treatments if no skin burning after first treatment.
-
Suction intensity: 40 kpa~50 kpa is recommended for the first treatment. And adjust the intensity to a stronger one if no skin burning after first treatment.
-
Treatment time: Max. 45 mins is recommended. Too long treatment may cause skin burning.
-
Important: If you feel obvious skin pain during treatment, please stop treatment immediately, to avoid skin burning.
This machine comes with 2 working mode: C/H and C. If you choose C/H working mode, by default, the handpiece will be heating for minutes during cooling process.
If you want only cooling during the whole treatment, please touch C/H to switch to working mode C.
If you want heating for 1~3 mins before cooling procedure, and always cooling after that, please choose mode C/H and do as follow:
Advanced setting – Enter code 201709 – Go to section of ‘C=12M’ and adjust the time(minutes) to 45M
Explanation:
C/H: Cooling-heating looping system to prevent skin burning.
C: Cooling all the time.
‘C=12M’: In cooling procedure, heating(lasting 3 mins) enabled after cooling for 12 mins.
‘C=45M’: Heating enabled after cooling for 45 mins. With this setup, it’ll be always cooling until you finished 45-min treatment.
Handpiece is loose while treatment, cause the fat is not much enough to fill in the cup or the suction pressure is not strong enough.
To buy antifreeze membranes, please click here: https://www.mtsaes.com/shop/antifreeze-membranes/
Maximum 2-3 treatment to get the perfect results and 20 days interval for the same area is recommended. Each treatment lasts for 45 minutes.
Not recommended to do massage or use cavitation RF machine after treatment. Cause massage or cavitation rf machine may increase the skin temperature, which affects the freezing results.
To speed up the cryo results, there are some tips as follows:
Tips for patients after cryo treatment:
- Do not overeat
- Drinking adequate amounts of water will help body eliminate fat cells faster
- Keep a healthy diet and doing exercise
Tips for physician after cryo treatment:
- Do not do heating treatment, like massage, cavitation RF fat exploding treatment
- Try our ESWT machine ShockWave PRO for much better results. It’s proven by other clients that ESWT help greatly enhance cryo fat removal results
For doublechin treatment, please set the temperature above 0 centigrade degree, recommended range is 0~3.
Cryolipolysis is the non-invasive cooling of adipose tissue to induce lipolysis (breaking down fat cells) without damage to other tissues. The result over two to four months is a noticeable, natural-looking reduction in fat.
Cryolipolysis is based on the principle that fat cells are more vulnerable to energy extraction (cooling) than surrounding tissues.A non-invasive applicator is attached to the targeted procedure area to extract energy from the underlying fat tissue, while protecting the skin, nerves, muscles and other tissue. The cooled fat cells undergo apoptosis (controlled cell death) and are gradually eliminated, reducing the thickness of the fat layer.
Clinical studies demonstrate that the Cryolipolysis procedure provides noticeable, measurable fat reduction in properly selected patients over the course of two to four months after the procedure. Additional procedures may be administered two to four months after the initial procedure to achieve greater fat reduction.
Patients experiencing fat layer reduction show persistent results at least six months after the Cryolipolysis treatment.Longer-term studies have not yet been completed. It is known that the exposure to cooling causes the fat cells to begin a process of natural removal, which gradually reduces the thickness of the fat layer. The fat cells in the treated area are gently eliminated through the body’s normal metabolism process, like fat from food. The elimination of fat cells as a result of the Cryolipolysis Procedure is expected to last about as long as fat cells removed by invasive procedures such as liposuction.
The Cryolipolysis Procedure is completely non-invasive, which allows immediate return to normal activities such as work or exercise. Redness may appear in the treated area, and may last from a few minutes to a few hours. Some localized bruising or swelling may occur, which clears within a few weeks. Many patients experience a temporary dulling of sensation in the treated area, lasting one to eight weeks.
Ideal candidates for the Cryolipolysis Procedure are relatively fit, but have some modest-size fat bulges that are not easily reduced through diet and exercise. They are seeking spot reduction for specific areas of fat, but are not considering a surgical procedure. The Cryolipolysis Procedure is not intended for weight loss or obesity, and it is not a substitute for invasive methods such as liposuction.
The controlled cooling of the Cryolipolysis Procedure targets and eliminates only fat cells. Other treatment modalities,such as lasers, radiofrequency and focused ultrasound, affect fat cells and may affect other adjacent tissue in a way that is not comparable to the Cryolipolysis.