Small AC Motors

Enlarge Image | Alternate View

(MOT) DZ-DF9328

Barber Coleman AC gear motor. 78 rpm, 115v, 50 Hz, 10w, 1.5 lb / in. 2-1/2" mounting centers. 2-5/8" deep. 1/4" x 3/4" shaft.

$29 each

Enlarge Image | Alternate View

(MOT) DF30-150

Barber Coleman AC gear motor. 93 rpm, 115v AC, 60 Hz, 16w, 1.3 lb inc. 2-5/8" deep, 2-1/2" mounting centers. 1/4" x 3/4" shaft.

$35 each

Enlarge Image | Flat Shaft View | Round Shaft View

(MOT) 7192-0003

Fasco AC motor. 1550 rpm, 208v, 60 Hz, 0.68 amp. Type 92B1. Sealed, ball bearings, thermally protected. Most commonly used in HVAC / R applications. Double shaft, 1 flat, 1 round.

$45 each

Enlarge Image | Close up of Label

(MOT) 8751-01

John Oster AC motor. Type 20U-8750-01.07200 rpm, 1/130 HP, 110v AC, 60 Hz, 0.2 amp. 1-7/8"D x 3-1/8"L body. 0.25" double flat shaft, 0.69"L. 1.14" mounting centers, 4 tapped face threads. Circa 1959. NSN: 6105-250-5131.

$29 each - $25 (3+)

(MOT) AB2C052B

Universal Motor Co. vintage fan motor. 1550 rpm, 115v, 50/60 Hz, 0.38 amp. Ball bearings. 30" wire leads. 3-1/4"D x 1-7/8"H. 1/2" mounting screws (x2). 3/4" threaded shaft for fan blade assembly attachment. Mfg. Owasso, Michigan. NOTE: Should be dismantled and lubed before use.

$19 each

(MOT) 7163-4715

Fasco Type U63 appliance motor. 1300/1550 rpm, 115v, 1.15 amp, 50/60 Hz. Sealed ball bearings. Thermall protected. 3-1/4"D x 2-1/2"H. 1"L shaft x 0.312"D. 4-3/8" mounting screws on 2" centers. 24" leads. New, old stock. Slight oxidation on shaft and housing.

$23 each

Enlarge Image | Opposite Side View

(MOT) 7164-0595

Fasco 1 phase AC motor. 115v AC, 50/60 Hz, 2.5/2.2 amps, 1300/1600 rpm. Sealed ball bearings. Requires capacitor. 3-3/8"D x 4.22"L. 3/8"D double shaft, 1.2"L. Mounting wings @ 120º. Fasco type: U64B1.

$45 each

Enlarge Image | Opposite Side View | Close up of Label

(MOT) 822-1A-172

Ampro / Scully torque motor. OEM vintage, New! 117v, 0.9 amps. Requires 4 mF, 330v AC capacitor (not included). Shaft 1 = 2.37"L, shaft 2 = 0.75"L. This is the same motor as (MOT) 2033920-01 which was manufactured by Ashland. Used in Ampro / Scully R2R equipment, among others.

$75 each

(MOT) 5KSP29FK1789S

General Electric AC motor. 1500 rpm, 1/8 HP, 115v, 60 Hz, 1 phase, 3.5 amps. 4 wires: black, white, red, blue. May require capacitor. 4-7/8"D x 3-1/2"L. 1/2" x 1-3/4"L shaft. Shaft end CW rotation. 3-3/16" x 3-3/16" stud centers. Alt. P/N: 22165.

$15 each - $12 (6+), $10 (25+)

(MOT) 5KSP19KSK129-S

General Electric 1 phase AC motor. 1550 rpm, 1/15 HP. 1 phase. 120v, 60 Hz, 2.5 amps. CCW rotation from lead end or CW shaft end. 3-3/4"D x 3-5/8"L. 5/16" x 1-1/2" shaft. 1-15/16" mounting centers on 4 head bolts. 4 wires (red, white, black, blue-green) may require capacitor.

$15 each - $12 (10+), $10 (50+)

(MOT) JA2C243D

ESP Enterprises appliance motor. 1745 rpm, 115v, 60 Hz, 0.37 amps. Impedance protected. 4-5/16" x 3-3/8" mounting bracket centers. 0.250" x 0.575:L shaft.

$18 each

Enlarge Image | Alternate View

(MOT) 29005-36

GI shaded pole motor. 230v, 50 Hz, C-Frame. Main shaft slotted to accept impeller. 3 tier shaft, 0.180"D, 0.150"D, 0.119"D. 1.13" overall length. 2-1/2" x 3" x 1-1/2" deep.

$10 each - $9 (6+)

Click here for PDF file

(MOT) KYC-24A1

Bodine K-2 series AC induction motor. Model 709. Enclosed, non-ventilated, permantently lubricated. 1,800 rpm, 0.6 oz-in torque, 1/900 HP, 115v AC, 60 Hz, 1 phase, 0.091 amps. 1.3µF capacitor included. New in the box!!

$150 each

(MOT) JB1N059N

Magnetek AC motor. 220v, 50/60 Hz, 0.73 amps, 2500 rpm, 0.03 HP. Ball bearings. 3-1/2"D x 3-1/2"L. 5/16" x 1-1/4"L shaft. 2" mounting centers on face studs.

$15 each - $13 (6+), $11.50 (20+)

(MOT) 7162-0981

Fasco AC motor. Type V62. 230v, 50/60 Hz, 0.77 amps, 2700 / 3200 rpm. Sealed ball bearings. 3-1/2"D x 3-7/8"L. 5/16"D x 1-1/2"L shaft. 2" x 2" mounting centers. Requires capacitor. Shaft is rusty.

$13 each - $10 (3+)

(MOT) 7162-1953

Fasco 1 phase AC motor. 230v, 50/60 Hz, 0.70 / 0.85 amps, 2800/3300 rpm. Sealed ball bearings. Requires 5 µF, 370v capacitor (includes CFO-45F1450). 3-3/8"D x 3-3/4"L body. 0.309" double "D" shaft, 1-3/4"L. 4 mounting studs on 2" centers.

$45 each

(MOT) C-78889

Delco 3 phase AC motor with centrifugal clutch. 115v AC @ 0.27 amps, 60 Hz, 3 phase or 50v AC @ 0.50 amps, 50 Hz, 3 phase. 4-1/4"D x 6-1/2" overall length. Made in 1942 by Delco, a GM division. Packed in waterproof boxes and perfectly preserved. Alt. P/N: C78432.

$20 each - $18 (6+)

(MOT) 7167-0524

Fasco 3 phase AC motor. 230v, 60 Hz, 1.3 amps, 3200 rpm. Sealed ball bearings. 4 mounting studs, 2" c-c on each end. 3-3/8"D x 5.5"L. 0.373"D x 3.5" / 1.4" double shaft. Fasco type: U67B1.

$39 each

(MOT) 203392-01

Ashland torque motor. 1100 rpm / 117v / 60 Hz / 0.9 amps. 1 ph. 1/40 NOM HP. Cap. 4.0 µf-330vAC (not incl.) Tapped heads each end 2.62" mounting centers. Double ended shaft. 0.314"D shaft x 2.37"L / 0.3"D "D" shaft x 0.75"L. This item is the same motor as (MOT) 822-1A-172, which is the OEM Ampro / Scully part number.

$65 each

Enlarge Image | Bottom End View | Close up of Tag

(MOT) 11263563

Bodine 1/25 HP AC motor. 1800 rpm, 230v AC, 1 phase, 0.46 amps, 60 Hz. Hysteresis synchronous motor, thermally protected. 4 tapped head mounting holes, 2.68" c-c. 4.26"D x 5.5"L body. 0.345"D x 1"L flatted shaft.

$125 each - $107 (3+)

(MOT) UB09CCH

A.O. Smith shaded pole appliance motor. Cast iron housing. 1,550 rpm, 230v AC, 0.27 amps, 9 watts, 60 Hz. CCWLE (counter-clockwise lead end) rotation. 1/4" x 20" threaded shaft. Mounts on bottom by four #8 screws on 5/8" x 1-1/8" c-c or three #8 screws on back 2-1/2" c-c. UL & CSA listed.

$23.50 each

Close up of Label

(MOT) SP3949

Hurst reversible direct drive motor. Permanent magnet AC synchronous. 115v AC, 300 rpm, 60 Hz, 14.5 watt. 20 oz/in torque. Ball bearings. Series 73mm. 1/4" x 9/16" "D" shaft. 2-7/8"D x 1.84"L (73mm x 46mm). 2-1/4" c-c- mount ears on four corners. Model RA-ET. 1.3 uf cap included. 30 pc/case.

$39 each - $35 (6+), $31.60 (30+)

Close up of Label

Click here for PDF file

(MOT) SP3950

Hurst reversible direct drive motor. Permanent magnet AC synchronous. 115v AC, 300 rpm, 60 Hz, 9 watt. 10.2 oz/in torque. Ball bearings. Series 59mm. 1/4" x 2" round shaft. 2.62" c-c- mount holes on diamond plate. ZP style, model SC. 0.85 uf, 250v AC cap included. 30 pc/case.

$27 each - $24 (6+), $20 (30+)

Close up of Label

Click here for PDF file

(MOT) SP3951

Hurst reversible direct drive motor. Permanent magnet AC synchronous. 115v AC, 300 rpm, 60 Hz, 9 watt. 10.2 oz/in torque. Ball bearings. Series 59mm. 1/4" x 3/4" round shaft. 2.62" c-c- mount holes on diamond plate. ZP style, model SC. 0.85 uf, 250v AC cap included. 30 pc/case.

$25 each - $22 (6+), $19 (30+)

(MOT) HSZ-20-50-4

Papst-Motoren KG AC motor. 115v, 60 Hz. 2.96" diameter. 1/4"D x 3/4"L shaft. Requires 6 µF capacitor.

$75 each

(MOT) DYAB-590-118

Barber Coleman motor. Continuous duty, undirectional, no load. 2400 rpm, 115v AC, 60 Hz, 0.15 amps, 9.5 watts.. 1/8" DIA x 3/4"L shaft. 2-5/8"W x 2-7/16"H x 2-3/8"D. Weight: 15 oz. 2 mount studs 2-1/32 c-c 11/16" below shaft. We have been told by our customers that this motor is a suitable replacement for antique Zephyr model fans.

*** SOLD OUT ***

(MOT) 18SM841

Tachtronic Instruments 110v AC, 50-60 Hz 1.75" diameter motor with molded mounting plate, 1.86" diameter, squared on top and bottom to 1.75", has 3 threaded 6-32nd mounting holes 1-27/64" c-c. 1" diameter x 1/4" thick raised ring (0.1"H) surrounds shaft area. 2" body depth, 2.4" overall depth including 0.4" long splined shaft. 0.12" diameter shaft with 9 teeth. 2875 rpm full load, 0.41 oz-in. Stall torque. Continuous duty rated. 4 wire, 2 coil (see image for wiring diagram). Requires 0.75 MFD start capacitor. Alt P/N: SM-C-108895. NSN: 6105-00-537-5971.

$165 each

(MOT) 9242M8

Somfy tubular motor. Commonly used for electric blinds. 120v AC. 88 in / lbs torque @ 30 rpm. 21"L, 1-1/2" round.

$165

(MOT) 5KSB33AS1101

Evaporator fan motor. 115v, 60 Hz, 0.20 amps, 3000 rpm single speed. 1/200 HP. 1/8" diameter shaft, 7/8" long. 2.4" long x 3.1" wide (with shaft) x 2.9"H overall. 1-7/8" c-c mounting holes. GE model WR60X84.

$15 each


Enlarge Image	Enlarge Image

(MOT) 910-4874

Gould shaded pole motor. Type B-FTP. Thermally protected. 1/70 HP, 3000 rpm, 120v, 60 Hz. CWSE rotation. C frame. Self lubricating. Dimensions: 2-3/8"W x 3"H x 1-15/16"D. Two 8-32 mounting studs, 1-7/8" c-c. 0.217" diameter x 0.913" long shaft.

$25 each - $21.50 (6+), $18 (25+)

(MOT) 61320-158

WSM motor with electric rotary brake (24 vdc actuator). 115v AC, 60 Hz, 0.4 amps. 5/16" x 1-3/4" shaft. 4-5/8" x 4-3/4" x 3-3/4" high. Includes 7 µF capacitor. 4 pin power plug can be removed.

$25 each

(MOT) 3M725A

Dayton 230v AC, 0.6 amp, 60 Hz, 1/30 horsepower, 1 phase shaded pole motor has 5/16" x 2" shaft. 3000 nameplate RPM, rotation CW, body dia. 3.3", 2-7/8" center - center on mounting studs. Sleeve bearings. New in the box.

$15 each

Welcome! Thank-you for visiting our online surplus electronic super store.

In order to use this site, your web browser must allow cookies and have javascript enabled.

Our cookies contain no personally identifiable information (PII). They are simply a unique serial number used to recognize this unique browser session.

By using this site, you aknowledge our privacy statement and agree to accept cookies.

Accept